CAB A6 Manual do Operador descarregar pdf (Página 63)

63cab Produkttechnik GmbH & Co KG

A3-2 / A3 / A4 / A6

Demand sensor - Limit peel-off spd.

This parameter allows to limit the print speed in peel-off mode to 4 ips

(100mm/s). For A3-2, A4 and A6 such a limitation is not necessary. So the

setting "Off" should be chosen.

When an A3 printer is delivered, the maximum print speed in peel-off mode is

limited to 4 ips (100mm/s). Even if the print speed for the peel-off mode is set

higher in the software, the print job will be carried out with a speed of 4 ips

(100mm/s). This limitation guarantees correct operation of the A3 in peel-off

mode when using maximum supply rolls (diameter 8 in (203mm), width 4.7 in

(120mm)).

When using smaller supply rolls it is possible to operate with higher speed. For

that purpose the speed limitation must be switched off. Then the print speed

can be set on all speeds up to 8 ips (200mm/s) for A3/200P or 6 ips (150mm/s)

for A3/300P.

CAUTION !

When operating the A3 in peel-off mode with higher speed it is strongly

recommended to carry out some tests beforehand by using appropriate

rolls with maximum diameter !

The speed limitation in the peel-off mode does not affect any other operation

modes like tear-off mode, cut mode or external rewinding.

Cutter

When the optional cutter is attached, the "Cutter" menu appears in the

"Machine parameters" menu.

The menu contains all of the parameters for the cut function.

Detailed information is available in the cutter documentation.

Applicator

When the optional applicator is attached, the "Applicator" menu appears in the

"Machine parameters" menu.

The menu contains all of the parameters for the applicator function.

Detailed information is available in the applicator documentation.

Brightness LCD

This parameter adjusts the level of brightness for the background on the

display.

Contrast LCD

This parameter adjusts the level of contrast to improve readability on the

display.

8. Printer Configuration

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 137 138

Sem comentários

CAB A6 Manual do Operador Página 63