CAB Apollo 1 Especificações descarregar pdf (Página 137)

- ATTENTION: - Read the SAFETY REGULATIONS (contained in this manual) carefully for the safety of all personnel and your vehicle.

C/61

LED 1 LED 2

Acoustic signal (Buzzer)

Coupling 1

YES ( 1.5 seconds)

Coupling 2

YES ( 1.5 seconds)

Coupling 3

YES ( 1.5 seconds)

Coupling 4

YES ( 1.5 seconds)

Coupling 5

YES ( 1.5 seconds)

(ﬁg.205/C)

GENERAL ALARM LED

The emergency indicator light/general alarm occur:

- in the event of engine error

- if one of the indicator lights indicated in the table below should switch on

- in the event of engine overrevving

Engine error

The engine has an electronic control unit that communicates directly with the central dashboard. The anomalies are signalled

by the general alarm indicator light accompanied by the acoustic signal with duration of 1.5 seconds and the display of the error

code on the LCD.

Switch-on of dashboard indicator lights

Some signal indicator lights, which are particularly important for the duration and use of the same in complete safety have been coupled

to the general alarm indicator light (ﬁg.205/C) with acoustic signal lasting 1.5 seconds. The acoustic signal functions only with the

engine running. The signalling of alarms by the indicator light “1” (ﬁg.205/C) has priority over other signals that this communicates.

Engine overrevving

The overrevving condition is signalled by reaching 3000rpm on the rev. counter.

The condition is signalled by the switch-on of the general alarm light intermittently and the acoustic signal (buzzer) continuously.

The alarm will stop when the engine has dropped below 3000rpm.

1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 233 234

Sem comentários

CAB Apollo 1 Especificações Página 137