CAB Apollo 1 Especificações descarregar pdf (Página 33)

B/13

- To prevent damaging hydraulic connections when chan-

ging an attachment, stop the engine and wait a minute

to remove pressure from the circuit. Always clean con-

nectors before their reinsertion.

- Check the cleanliness, protection and the conditions of

rapid detachment connections in attachment circuits daily.

- ATTENTION -

Operators who note that the vehicle is not operating pro-

perly or that is does not conform to safety regulations

must immediately inform the construction site manager.

- PROHIBITION -

IT IS FORBIDDEN for operators to directly carry out

repair or adjustment work unless trained to do so. Only

the person charged to do so should carry out mainte-

nance work on the vehicle.

- PROHIBITION -

IT IS STRICTLY FORBIDDEN to attempt starting the vehi-

cle by pushing or pulling on it. This may cause serious

damage to people and/or the vehicle.

- If operating the vehicle at low temperatures (-10°C),

empty and reﬁll the tank using lubricants, fuel or cooling

liquids suitable for such temperatures.

- ATTENTION -

The use of the vehicle in protected environments such as

reﬁneries or explosive atmospheres is STRICTLY PROHI-

BITED. Special optional equipment is available for use in

these types of locations. Contact your agent or dealer.

- Ensure that service brakes and horn are working properly.

- Slow down before turning.

- Maintain control of the vehicle and its speed in all situations.

- Do not drive in reverse for long distances.

- Brake slowly, avoid abrupt braking.

- Hydraulic steering is very sensitive to steering wheel mo-

vements. Steer slowly and avoid any sudden movements.

- The speed of vehicles with loads must never exceed 10

Km/h. Should the load exceed 50% of the maximum admit-

ted load, the machine speed must be reduced to 5Km/h.

- PROHIBITION -

Carrying people on or lifting people up with the vehicle

is STRICTLY PROHIBITED unless the vehicle is equip-

ped for said purpose and has a special certificate of

conformity regarding the transport of people.

- Carefully follow loading programme instructions.

- ATTENTION -

Before each use, check that attachments have been proper-

ly mounted and secured on their corresponding supports.

- ATTENTION -

Prior to each use, check that the cab safety system has

been set in compliance with the mounted attachment.

- Instructions supplied by the anti-tipping system must be

considered valid for vehicles in standard working condi-

tions, on ﬂat, even ground and with properly functioning

and correctly calibrated instruments. Regardless, limit va-

lues displayed on the load tables must never be exceeded.

- Never bring equipment near open ﬂames.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 233 234

Comentários a estes Manuais

Sem comentários

CAB Apollo 1 Especificações Página 33

Comentários a estes Manuais

Manuais e produtos relacionados com Impressoras de rótulos CAB Apollo 1